A library table with an open binder, loose ruled sheets and a mug, lit by a lamp just outside the frame

AP Chemistry is nine units, and the College Board publishes both their order and the share of the exam each one carries. Unit 3 is the largest at 18% to 22%, Unit 8 next at 11% to 15%, the other seven at 7% to 9%. This guide takes each unit’s chemistry in turn and puts them in a study order.

Everything structural here comes from the AP Chemistry Course and Exam Description, which is the published course framework, rather than from any one teacher’s sequence. Where this guide adds something, it is the chemistry underneath each unit and the distinction students most often miss in it.

What does the exam look like?

Two sections, each worth half of the exam. Section I is 60 multiple-choice questions in 1 hour 30 minutes. Section II is 7 free-response questions in 1 hour 45 minutes, made up of 3 long-answer questions worth 10 points each and 4 short-answer questions worth 4 points each. Calculators are permitted.

The fact worth building a study plan around is the reference booklet. The College Board supplies it on exam day, and it contains a periodic table, the metric prefixes, constants including Avogadro’s number as 6.022 x 10^23 per mole and the gas constant R as both 8.314 J per mol per K and 0.08206 L atm per mol per K, and the equations for atomic structure, gases and solutions, kinetics, equilibrium and thermodynamics.

Read that list carefully. Some conditions are printed: Kw and pH + pOH = 14 both carry “at 25 degrees Celsius” beside them, and the kelvin conversion is in the unit table. Others are not. The three integrated rate laws and the half-life expression t½ = 0.693 / k appear with nothing saying which reaction order each one belongs to. PV = nRT is printed with no note that it describes ideal behavior rather than real gases. The equations are given; most of the conditions are not, and the missing ones are exactly where answers go wrong. That is why memorizing formulas is a poor use of the last month, and why a study plan should be built around knowing when a relationship applies.

Unit 1: Atomic Structure and Properties, 7% to 9%

About nine to ten class periods. The framework describes this unit as setting the foundation by examining the atomic theory of matter, moving between the particulate scale and the macroscopic collections we actually measure, and it is where the mole enters as the translation between them.

The relationships that carry it: electron configuration as the filling rules rather than as a formula, and molar mass as the bridge from grams to particles.

The distinction most often missed: periodic trends are usually memorized as arrows and then cannot be explained. The framework says this directly, noting that students can memorize periodic trends but struggle to explain the electrostatic interactions inside an atom that produce them. If you can state that atomic radius decreases across a period but cannot say why, you have memorized the half that is easiest to look up and skipped the half the questions are built on.

Unit 2: Compound Structure and Properties, 7% to 9%

About twelve to thirteen class periods. The framework’s framing is that chemical and physical properties are explained by the arrangement of atoms and the forces between them, and that electronegativity can be used to predict what kind of bonding is present.

Carried by: Lewis structures, including formal charge as the tiebreaker between two structures that both satisfy the octet rule, and covalent bonding sorted by electronegativity difference.

The distinction most often missed: a chemical bond and an intermolecular force are not the same kind of thing, and the framework calls them distinct. Boiling water breaks intermolecular attractions between molecules. It does not break the O to H bonds inside them.

Unit 3: Properties of Substances and Mixtures, 18% to 22%

About fourteen to fifteen class periods, and the single largest share of the exam by a wide margin. The framework describes it as the relationship between the macroscopic properties of solids, liquids and gases and the arrangement, freedom of motion and interactions of their particles, along with determining the structure and concentration of a species in a mixture.

Carried by: the ideal gas law and molarity, plus the dilution relation.

The distinction most often missed: molarity is moles of solute per liter of solution, not per liter of solvent. Everything downstream of a concentration inherits that error silently. If you study one unit longer than the others, the exam weighting says it should be this one.

Unit 4: Chemical Reactions, 7% to 9%

About fourteen to fifteen class periods. The framework’s emphasis is on writing and balancing chemical equations, in molecular, complete ionic and net ionic forms, and calculating quantities from them.

Carried by: the mole ratio from a balanced equation, which OpenStax describes as a conversion factor used like any other, plus limiting reactant and percent yield.

The distinction most often missed: identifying the limiting reactant by comparing raw mole counts instead of moles divided by coefficient. The worked practice set runs that comparison through four different problem shapes, including one where the reactant present in greater molar amount is the one that runs out.

This unit is small on the exam and enormous in the course, because Units 5 through 9 all assume you can get from a mass to an amount without thinking about it.

Unit 5: Kinetics, 7% to 9%

About thirteen to fourteen class periods. The framework frames it as rates of change and the factors that influence them: concentration, temperature, catalysts, and the details of molecular collisions.

Carried by: the rate law, the Arrhenius equation, and the half-life expression.

The distinction most often missed: reaction orders come from experiment, not from the coefficients of the balanced equation. OpenStax states that they must be determined experimentally. This is the mistake the printed reference booklet actively invites, because it gives you the integrated rate laws and the first-order half-life without saying which order each one belongs to.

Unit 6: Thermochemistry, 7% to 9%

About ten to eleven class periods. The framework’s key idea is stated plainly: breaking a chemical bond requires an energy input, and forming one releases energy, because formation is the reverse process.

Carried by: Hess’s law and calorimetry through q = mcΔT.

The distinction most often missed: sign conventions, which are conventions rather than facts about the world, and which reverse when you reverse a reaction. Hess’s law problems are mostly an exercise in flipping and scaling equations without losing track of a sign.

Unit 7: Equilibrium, 7% to 9%

About thirteen to fifteen class periods. The framework describes equilibrium as a dynamic state in which opposing processes occur at the same rate, with Le Chatelier’s principle as the qualitative tool and the equilibrium constant K as the quantitative one.

Carried by: the equilibrium constant expression and the reaction quotient Q, which the framework describes as the analogous expression for a reaction at any point, enabling comparison to the equilibrium state.

The distinction most often missed: K and Q have identical algebra and completely different jobs. K describes one specific state. Q describes wherever the system is right now, and the comparison between the two is what tells you which direction the reaction moves. Students who treat them as the same symbol lose the entire reasoning step.

Unit 8: Acids and Bases, 11% to 15%

About fourteen to sixteen class periods, and the second largest share of the exam. The framework builds it on Unit 7 and notes that proton-exchange reactions are reversible reactions reaching equilibrium quickly, so most of this unit is equilibrium wearing different notation.

Carried by: the pH relation, the Henderson-Hasselbalch equation, and titration arithmetic.

The distinction most often missed: strength and concentration are independent. A dilute strong acid and a concentrated weak acid are different situations that students routinely merge. And the buffer relation is not universal: OpenStax describes buffers as working within a limited range of added acid or base, which is why a Henderson-Hasselbalch answer for a buffer that has been overwhelmed is meaningless rather than merely imprecise.

Unit 9: Thermodynamics and Electrochemistry, 7% to 9%

About ten to thirteen class periods. The framework says outright that this unit connects principles and calculations across Units 1 through 8, which is why it goes last and why it is the worst unit to meet for the first time in April.

Carried by: the Gibbs free energy equation and the Nernst equation.

The distinction most often missed: a thermodynamically favorable reaction and a fast reaction are unrelated claims. Gibbs free energy says which direction a change is favored; Unit 5 says whether it happens on a human timescale. A reaction can be strongly favorable and effectively not occur.

What order should you study them in?

Not the order they are listed, if you are reviewing rather than learning them for the first time. Three principles:

Repair Unit 4 first, whatever your plan says. It is only 7% to 9% of the exam on its own, but a stoichiometry chain sits inside almost every quantitative question in Units 5 through 9. Time spent here is spent several times over. The five-step routing sequence is the version to have automatic.

Then weight by the published shares. Unit 3 at 18% to 22% and Unit 8 at 11% to 15% together are roughly a third of the exam. Seven units split the rest evenly, so a plan that gives all nine equal time is quietly underweighting a third of the paper.

Then do Unit 7 before Unit 8 and Unit 5 before Unit 9. These are not preferences. The framework builds acid-base chemistry on equilibrium explicitly, and Unit 9 on everything before it.

A workable review pass: Unit 4, then Unit 3, then Unit 7 and Unit 8 together as one block of equilibrium, then Units 1 and 2 as a structure block, then Units 5, 6 and 9 as an energy and rate block.

Within each block the loop that repairs a unit is narrow: work a problem, find the exact line that broke, and fix that. Flasky is built for that step, naming the relationship a problem needs and the condition it carries before it works the chain, with quizzes and flashcards for the recall side once a unit already makes sense. The reasoning is shown on every step, which is the only form in which an answer tells you anything about the unit you are repairing.

What does the last week look like?

Consolidation, not new material. Take the reference booklet and go down it relationship by relationship, and for each one write the condition it requires next to it from memory. Kelvin for anything with T in it, and the pressure converted to match the R you picked. Which order each integrated rate law and the half-life expression belongs to. The conditions under which ideal gas behavior is a fair assumption. Which reactant limits before any yield is computed. That exercise takes an hour, and most of what it produces is information the booklet leaves out.

Then work full free-response questions under time, whole rather than in pieces, because a 10-point long-answer question is mostly a test of whether you can keep a chain of reasoning intact across four sub-parts.

Every relationship named above has a page on this site with its conditions, its variables and a worked example, collected at chemistry formulas. The framework is published by the College Board and worth reading directly; this guide is the chemistry sitting underneath it.

Sources